After buying a washing machine, few people want to spend money on an installation that is obsessively offered by employees of household appliances stores. In this article we will tell you how to install a washing machine yourself.
First step. Installation
You have received the long-awaited equipment, now it's time to proceed to the installation. You will need to remove the transport bolts located on the back of the machine body. Fasteners are necessary so that the tank does not hang inside during transportation, as this can damage the "inside" of the equipment. Bolts will not allow you to turn on the machine, moreover, this can lead to serious damage. To avoid problems with removing the bolts, use a wrench or pliers. Close the holes with the plastic plugs that are supplied with the washer. Do not throw away fasteners - they will come in handy in case of moving.
Recommendation! Before turning on the washing machine for the first time, carefully read the instructions. This will protect the equipment from possible breakdowns and damage through negligence.
Where is the best place to install SMA
It’s not difficult to connect the washing machine yourself, but initially you need to figure out where to install the equipment. The place should be such that in the future the equipment was convenient to maintain and select all the necessary details. Often owners prefer to install the car in the bathroom, as it is not only convenient and practical, but also combines with any interior. But in this case, it must be borne in mind that increased humidity can adversely affect the operation of the SMA. A washing machine is also installed in the kitchen. This option is quite acceptable, especially when there is not enough space in the bathroom. And in the kitchen, the machine can be built into a cupboard, hidden in a closet or installed in a niche. If you wish, you can install the SM in the hallway, if there is enough space and there is a power outlet. Before installing it is very important to think it over, weigh the pros and cons.
Hot water: yes or no
Today, some modern models of cars are suitable for connecting cold and hot water. But the opinion of experts boils down to the fact that when connecting hot water, no benefits are expected. Modern machines have a heating element that heats the water to the desired temperature. But there are significant drawbacks:
- Water can be very polluted unlike cold. Therefore, you often have to clean the filler valve filter (and the drain valve too). You will have to do this either on your own or call the wizard, and this will hit the family budget.
- Hot water is very hard, so you have to spend more washing powder. Otherwise, after washing, things will remain dirty.
If it is impossible to connect the washing machine to hot water, then there is no need to think about this issue.
Second phase. Water connection
Connecting the washer to the water supply is a process that requires special attention, accuracy and accuracy. If done correctly, your machine will work properly. To connect the equipment to the pipeline, you will need flexible hoses with a diameter of 2 cm. To connect the washing machine to water, do the following:
- Find the right place in the water supply and cut the thread.
- What do you need to install the valve? Fasteners - they guarantee a secure fit.
- Install a protective net to prevent small foreign objects from entering the drum.
Advice! Clean the net and close the valve after each wash - this will ensure stable and efficient operation of the machine.
To supply water, you need a ready-made outlet connected to a mixer or a drain tank. Such a simple installation diagram will help you cope with the connection to water.
The third stage. Network connection
This process requires responsibility. It is necessary to install one outlet, which must have water protection and grounding. Most modern washers are often protected against current and have grounding. But it’s better to be safe again than to endanger your life, and your equipment - to failure. Basically, all machines have a power cord of approximately 1.5 meters in length. Therefore, the outlet must be at such a distance that you can connect the equipment to the network.
Recommendation! Do not use extension cords as they do not guarantee safety!
If this stage is passed without any difficulties, it is time to move on to the final step.
The fourth stage. Fixing machine
Continue the installation instructions. Do not know how to install the SM so that when washing and spinning there are no vibrations, jumps and shaking? This problem occurs due to uneven floors. The machine must be installed on a perfectly flat floor. If you find any irregularities, use a rubber mat - put it under the machine. The mat perfectly dampens vibrations. In no case do not use wooden linings or linoleum clippings - they only temporarily fix the problem. We offer a way to help make sure that the washer is installed correctly and at the right level: leverage all the weight on each corner of the top cover. If none of them lends itself down, the machine is level.
Important! If you neglect the installation rules, the machine will jump during washing. Usually it ends in breakdowns.
The final stage. Testing
Did you cope with all the difficulties when installing the equipment yourself? Now it remains to evaluate the result of the work done - to make sure that everything is done correctly and that the machine works as it should. Verification is as follows:
- When you select the washing mode, the drum rotates, but does not stand still.
- There are no signs of leakage - the hoses are well connected.
- When turned on, there are no extraneous noise inside the machine.
- Proper operation of the spin and drain, stably functioning after washing, confirm the correct installation.
If you are interested in the visual detailed installation of the washing machine, the video instruction will help you figure it out:
Now you can check the effectiveness of washing clothes in the AGR. Good luck and enjoy using it.