We'll figure out what kind of malfunctions are typical for Samsung with two cameras, find out the typical breakdowns in ordinary models and with the No Frost function.
Two-chamber refrigerators, manufactured by the famous Korean corporation Samsung, are created according to the classical scheme. Thanks to the control system and the optimized heat-insulating layer of both chambers, energy consumption has been reduced, so they are at the peak of popularity.
Samsung two-chamber refrigerator: malfunctions
Damage to refrigerators of this type is associated with the device. Functionality provides a combination of such systems:
- case with two chambers - refrigeration and freezer, which provides antibacterial coating;
- a cooling system equipped with two necessary elements - a motor-compressor and a radiator;
- a control module that monitors the operation of temperature conditions;
- device that monitors the occurrence of breakdowns (self-diagnosis system).
Minor damage leading to major malfunctions
Typically, refrigerators do not break down sharply - this is preceded by a whole strip of various signs indicating the likelihood of further damage. It is sometimes difficult for an unprepared user to catch these “distress” signals, so the problem starts until it develops into a serious failure. Take note of such shortcomings in the operation of the Samsung refrigerator with two cameras to prevent breakage on time:
- Sometimes when you press the control buttonthese or other commands are not executed. Usually, users restart the refrigerator, and the problem itself is neutralized, and the problem is attributed to a “glitch”. As a rule, this behavior means that the signal is lost on the loop connecting the control board and the door console. This is to blame for worn wiring and loose contacts at the joints. If you do not pay attention to this failure, it may result in the need to repair or replace the control module.
- Are heard noise during operation of the motor-compressor, and when turned off, the appliance vibrates too much. This may indicate a malfunction of the motor, but at the initial stage it is enough to inspect its mountings.
Important! Such an inconspicuous failure often results in a refrigerant leak.
- Slowly but surelythe temperature in one of the chambers rises (more often - in the refrigerator). Most likely, the chamber was depressurized or the steam circulation was disturbed. Also, it is possible that the voltage at the contacts can decrease. Such a malfunction results in the fact that the upper chamber does not work at all or the motor-compressor fails.
Frequent breakdowns of two-chamber “Samsung” and their repair
Most often, the Samsung refrigerator, equipped with two separate cameras, fails for the following reasons:
- The control module breaks due to power surges.
- The thermistor or its terminals, contacts, wiring fails.
- The No Frost system breaks.
- There is no cold in the lower chamber.
- Violation of the tightness of the system, as a result of which there is a leak of refrigerant (freon).
- Violations of the self-diagnosis system.
In modern Samsung refrigerators (and in models of other brands), repairs usually come down to replacing parts, since many of them cannot be repaired. Service centers have a complete repair base to deal with such situations.
Two-chamber refrigerator “Nou Frost”: malfunctions
In Samsung dual-compartment refrigerators with Cool`n`Cool or No Frost, malfunctions are caused by the features of these systems. Failures are preceded by such phenomena:
- the formation of an ice layer due to improperly set temperature conditions, which entails an increased consumption of energy resources;
- overfilled pan (at the same time, products begin to disappear quickly).
Important! Difference of refrigerators "Samsung»No Frost of the two-chamber type consists in the static temperature in each chamber (fluctuations do not exceed 0.3 degrees). In different parts of the chambers, various temperature regimes operate.
Other issues
In the modern model, the control panel will respond to a breakdown by displaying a fault code on the display. In simpler versions, a certain combination of bulbs or a special ALARM indicator flashes. Breakage of models with Know Frost can be triggered by a number of factors:
- Chamber temperature increase more than 3 degrees. This can be triggered by the frequent opening of the door on a particularly hot summer day. To fix the problem, just close the door tightly and do not open for several hours.
- No temperature selected. You can fix the situation by contacting the user guide.
- Fan breakdown. No Frost freezers have a special fan that circulates cold air through the chambers. If this part breaks, the entire “Without Hoarfrost” system fails. Failure can be detected by the appearing ice or snow "coat" - in models with NF this phenomenon should not be. Also, the characteristic light noise emitted by the evaporator fan is lost.
Important! Sometimes the cooler simply freezes with ice, which makes it difficult to rotate. Failure is accompanied by noise from the freezer. To fix the problem, it is enough to defrost the system (note that the NO FROST models require 24 hours to defrost).- If the door is rearranged incorrectly, the control panel contacts may be broken. If the bulbs randomly blink or the panel and the board do not work at all, it is worth checking the connections.
Failures of refrigerators with two cameras on electronic control and the Nou Frost system can also be disturbed by such failures:
- knocking, noise, rattling;
- poor cooling during normal operation of the freezer;
- serviceable freezer in the absence of cold in the main compartment;
- water inside the chambers;
- slow start of the compressor or its start with a long delay;
- continuous operation of the motor;
- display breakdown.
The problems listed above relate to the electronic part, but there are breakdowns that occur exclusively mechanically. The result they usually have is:
- breaks in the electric circuit of the defrost heater;
or such;
- refrigerant leakage from the circuit.
Breakdown prevention
Probably everyone knows how to care for an ordinary refrigerator. Models equipped with No Frost require special attention and care:
- Avoid manual defrosting. Automatic defrosting is allowed no more than once a year to wash and clean the refrigerator.
- Wash shelves and containers without using abrasive household chemicals. A normal aqueous soda solution is suitable - it will perfectly eliminate odor and pollution.
- The back surface also needs to be processed - dust must be brushed off and dirt must be cleaned to protect the units from overheating.
- On No Frost models, products are stored in bags, cling film, or airtight containers.
Two-chamber refrigerators of the Samsung brand are one of the most popular on the market, so if they break, there will be no problems with repair and selection of parts. But it is better not to bring the situation to a critical state, to notice malfunctions in time and to avoid failures.